Elegoo Centauri Carbon: print settings
19 sourced settings for this printer.
Looking for this printer? Find Elegoo Centauri Carbon on Amazon (affiliate link).
official
PLA
Elegoo Centauri Carbon · ELEGOO
Nozzle 190-230 °CBed 50-66 °C0.4 mm
ELEGOO PLA product listing: prints smoothly 190–230 °C. ±0.02 mm diameter tolerance claimed.
See full settings →official
Rapid PETG
Elegoo Centauri Carbon · ELEGOO
Nozzle 240-270 °CBed 65-75 °CSpeed <300 mm/s0.2–0.8 mm
ELEGOO Rapid PETG TDS: dry 60 °C / 8 h; RH ≤20%; glue on plate. Specimen printed at 255/70 °C, 250 mm/s.
See full settings →guide
PLA Matte
Elegoo Centauri Carbon · ELEGOO
Nozzle 190-230 °CBed 50-66 °C0.4 mm
ELEGOO open filament database temps.
See full settings →guide
PLA Plus
Elegoo Centauri Carbon · ELEGOO
Nozzle 200-230 °CBed 35-65 °C0.4 mm
ELEGOO PLA Plus temps from open filament DB.
See full settings →guide
Silk PLA
Elegoo Centauri Carbon · ELEGOO
Nozzle 190-230 °CBed 35-65 °C0.4 mm
ELEGOO Silk PLA temps.
See full settings →guide
PLA Wood
Elegoo Centauri Carbon · ELEGOO
Nozzle 200-240 °CBed 35-65 °C0.4 mm
ELEGOO PLA Wood. Avoid 0.2 mm nozzle per ELEGOO wiki notes on wood fills.
See full settings →guide
PLA-CF
Elegoo Centauri Carbon · ELEGOO
Nozzle 190-230 °CBed 50-70 °C0.4 mm
Hardened nozzle. ELEGOO wiki: CF abrasive; not for 0.2 mm.
See full settings →guide
RAPID PLA Plus
Elegoo Centauri Carbon · ELEGOO
Nozzle 200-230 °CBed 40-60 °C0.4 mm
High-speed PLA+; wiki notes Rapid PLA+ for <600 mm/s class printers.
See full settings →guide
PETG
Elegoo Centauri Carbon · ELEGOO
Nozzle 220-250 °CBed 70-90 °C0.4 mm
ELEGOO standard PETG temps.
See full settings →guide
PETG PRO
Elegoo Centauri Carbon · ELEGOO
Nozzle 230-260 °CBed 65-75 °C0.4 mm
ELEGOO PETG PRO temps.
See full settings →guide
PETG-CF
Elegoo Centauri Carbon · ELEGOO
Nozzle 240-270 °CBed 65-75 °C0.4 mm
Hardened nozzle. ELEGOO PETG-CF.
See full settings →guide
TPU 95A
Elegoo Centauri Carbon · ELEGOO
Nozzle 210-230 °CBed 35-61 °C0.4 mm
Direct drive; print slow. Dry mandatory per ELEGOO drying guide.
See full settings →guide
Rapid TPU 95A
Elegoo Centauri Carbon · ELEGOO
Nozzle 200-230 °CBed 30-46 °C0.4 mm
ELEGOO Rapid TPU 95A temps.
See full settings →guide
ABS
Elegoo Centauri Carbon · ELEGOO
Nozzle 240-280 °CBed 90-100 °C0.4 mm
Enclosure required. Dry ~70 °C / 4–6 h per ELEGOO drying guide.
See full settings →guide
ASA
Elegoo Centauri Carbon · ELEGOO
Nozzle 240-270 °CBed 90-100 °C0.4 mm
Enclosure. Dry ~70 °C / 4–8 h.
See full settings →guide
PC
Elegoo Centauri Carbon · ELEGOO
Nozzle 250-270 °CBed 90-110 °C0.4 mm
Enclosed / hot chamber. Dry mandatory ~80 °C.
See full settings →guide
PAHT-CF
Elegoo Centauri Carbon · ELEGOO
Nozzle 260-290 °CBed 90-110 °C0.4 mm
Hardened nozzle. Engineering nylon-CF.
See full settings →official
Drying — PLA series
Elegoo Centauri Carbon · ELEGOO
ELEGOO drying guide: PLA series recommended dry 55±5 °C for 6 h. Store sealed with desiccant.
See full settings →official
Drying — PETG / TPU / ABS
Elegoo Centauri Carbon · ELEGOO
ELEGOO drying guide: PETG 60±5 °C 8–10 h; TPU mandatory 70±5 °C 6–10 h; ABS 70±5 °C 4–6 h (enclosed print); A…
See full settings →