Bambu Lab H2S / Fuzzy Skin — standard start

Fuzzy Skin — standard start on Bambu Lab H2S

guide

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab H2S

Filament brand

PLA

Filament type

Fuzzy Skin — standard start

Slicer

OrcaSlicer 2.5

Nozzle size

0.4 mm

Nozzle temp

190-230 °C

Bed temp

50-65 °C

Notes

Apply Orca community standard fuzzy: thickness 0.3 mm, point distance 0.8 mm on Contour. Prefer Displacement or Combined; Extrusion needs Arachne. Orca 2.5 skips fuzzy on bridging walls.

Source: OrcaSlicer Wiki (community mirror) · 2026-10-01

Summarized from the linked source. Always test on scrap before production runs.