Matte PLA on Bambu Lab A1

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab A1

Filament brand

Overture

Filament type

Matte PLA

Slicer

Bambu Studio / OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

190-230 °C

Bed temp

50-70 °C

Speed

<300 mm/s

Notes

Official Overture cheat sheet: slightly abrasive — hardened nozzle recommended for long-term use. Dry 50°C / 7h.

Source: Overture 3D Wiki · 2026-11-02

Summarized from the linked source. Always test on scrap before production runs.