Fuzzy Skin — medium (0.2 mm) on Any (OrcaSlicer 2.5)

guide

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer 2.5)

Filament brand

—

Filament type

Fuzzy Skin — medium (0.2 mm)

Slicer

OrcaSlicer 2.5

Nozzle size

0.4 mm

Notes

Guide typical start: ~0.2 mm nozzle path deviation. Author notes >0.4 mm often strings unless filament is very dry.

Source: 3D Printing Basics · 2026-09-06

Summarized from the linked source. Always test on scrap before production runs.