Fuzzy Skin — TPU caution on Any (OrcaSlicer 2.5)

guide

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer 2.5)

Filament brand

TPU

Filament type

Fuzzy Skin — TPU caution

Slicer

OrcaSlicer 2.5

Nozzle size

0.4 mm

Nozzle temp

210-230 °C

Bed temp

25-60 °C

Speed

<40 mm/s

Notes

Guide: flexibles need a different approach due to elasticity; keep speeds low. Fuzzy can fail more often on TPU — test small coupon first.

Source: 3D Printing Basics · 2026-09-06

Summarized from the linked source. Always test on scrap before production runs.