Any (OrcaSlicer 2.5) / Texture Displacement — knurled grip

Texture Displacement — knurled grip on Any (OrcaSlicer 2.5)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer 2.5)

Filament brand

—

Filament type

Texture Displacement — knurled grip

Slicer

OrcaSlicer 2.5

Nozzle size

0.4 mm

Notes

Official Orca wiki recipe: Knurl texture, Tile size 4 mm, Depth 0.35 mm, Midlevel 0, resolution ~0.12 mm (finer than ridge width), then Bake. Depth becomes real geometry.

Source: OrcaSlicer Wiki · 2026-11-02

Summarized from the linked source. Always test on scrap before production runs.