Bambu Lab H2S / PC

PC on Bambu Lab H2S

official
Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.
Printer
Bambu Lab H2S
Filament brand
Bambu Lab
Filament type
PC
Slicer
Bambu Studio
Nozzle size
0.4 mm
Nozzle temp
260-290 °C
Bed temp
90-110 °C
Chamber / enclosure
Enclosed / high chamber
Notes
Engineering PC. Dry thoroughly. Enclosure required.
Source: Bambu Lab Wiki · 2026-10-13
Summarized from the linked source. Always test on scrap before production runs.