Any (OrcaSlicer 2.5) / Fuzzy Skin — Standard

Fuzzy Skin — Standard on Any (OrcaSlicer 2.5)

guide

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer 2.5)

Filament brand

—

Filament type

Fuzzy Skin — Standard

Slicer

OrcaSlicer 2.5

Nozzle size

0.4 mm

Notes

Fuzzy skin (toolpath texture). Default starting point from Orca community wiki: thickness 0.3 mm, point distance 0.8 mm. Modes in 2.5: Contour / Hole / Contour+Hole / Painted Only / All Walls. Generator: Displacement, Extrusion (needs Arachne), or Combined. 2.5 also skips fuzzy skin on unsupported bridging walls.

Source: OrcaSlicer Wiki (community mirror) · 2026-10-01

Summarized from the linked source. Always test on scrap before production runs.