TPU 95A on Bambu Lab A1 / P1 / X1 family

youtube

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab A1 / P1 / X1 family

Filament brand

—

Filament type

TPU 95A

Slicer

Bambu Studio

Nozzle temp

225 °C

Speed

30 mm/s

Retraction

slightly adjusted from generic

Notes

YouTube TPU tips: start from generic TPU (default ~240°C), author runs 225°C nozzle; set all print speeds to 30 mm/s; dry filament; external spool (not AMS) for typical 95A; softer ≤90A harder to feed.

Source: YouTube maker tip · 2026

Summarized from the linked source. Always test on scrap before production runs.