Any (OrcaSlicer 2.5) / Fuzzy Skin — PLA start

Fuzzy Skin — PLA start on Any (OrcaSlicer 2.5)

guide

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer 2.5)

Filament brand

PLA

Filament type

Fuzzy Skin — PLA start

Slicer

OrcaSlicer 2.5

Nozzle size

0.4 mm

Nozzle temp

190-230 °C

Notes

Community guide (2026): for PLA start with thickness/distance about 0.2–0.3 mm (their Distance parameter) to limit stringing. Dry filament; fuzzy skin increases direction changes.

Source: Kai Brenner / 3D Printing Basics · 2026-09-06

Summarized from the linked source. Always test on scrap before production runs.