UltiMaker S / Factor / 3 / 2+ Connect / PETG

PETG on UltiMaker S / Factor / 3 / 2+ Connect

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

UltiMaker S / Factor / 3 / 2+ Connect

Filament brand

UltiMaker

Filament type

PETG

Slicer

UltiMaker Cura

Nozzle size

0.4 mm (AA/AA+)

Nozzle temp

225-245 °C

Bed temp

85 °C

Notes

Official UltiMaker PETG guide (Cura profiles): nozzle 225-245°C; build plate 85°C. On Ultimaker 2/2+ without native PETG profile, use CPE base and set nozzle 245°C / bed 85°C. Profiles in Cura since 4.9.1.

Source: UltiMaker Support · 2025

Summarized from the linked source. Always test on scrap before production runs.