UltiMaker S / Factor / 3 / 2+ / PC

PC on UltiMaker S / Factor / 3 / 2+

official
Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.
Printer
UltiMaker S / Factor / 3 / 2+
Filament brand
UltiMaker
Filament type
PC
Slicer
UltiMaker Cura
Nozzle size
0.4 mm (AA/AA+)
Nozzle temp
260-280 °C
Bed temp
~110 °C
Notes
Official UltiMaker PC guide: nozzle 260-280°C; build plate ~110°C (varies slightly by printer); enclosed/stable environment; Magigoo PC recommended for adhesion; high bed temp caution on glass plates.
Source: UltiMaker Support · 2025
Summarized from the linked source. Always test on scrap before production runs.