Fuzzy Skin — PETG/TPU caution on Any (OrcaSlicer 2.5)

guide

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer 2.5)

Filament brand

PETG / TPU

Filament type

Fuzzy Skin — PETG/TPU caution

Slicer

OrcaSlicer 2.5

Nozzle size

0.4 mm

Notes

Community guide (2026): for PETG or TPU keep Distance under ~0.2 mm and slow skin-layer speed to reduce dragging/stringing.

Source: Kai Brenner / 3D Printing Basics · 2026-09-06

Summarized from the linked source. Always test on scrap before production runs.