ABS on Snapmaker U1

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Snapmaker U1

Filament brand

Snapmaker

Filament type

ABS

Slicer

Snapmaker Orca / OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

240-280 °C

Bed temp

90-100 °C

Speed

50-200 mm/s

Cooling

OFF

Notes

Snapmaker ABS filament FAQ: nozzle 240-280°C; bed 90-100°C; speed 50-200 mm/s; fan OFF; dry 80°C/6h if needed; enclosure recommended.

Source: Snapmaker Wiki · 2025

Summarized from the linked source. Always test on scrap before production runs.