PRO Series PETG on Any (PRO Series)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (PRO Series)

Filament brand

MatterHackers

Filament type

PRO Series PETG

Slicer

Any

Nozzle size

1.75 mm

Nozzle temp

230–250 °C

Bed temp

65 °C

Speed

30–150 mm/s

Notes

MatterHackers PRO Series PETG TDS: suggested print temp 230–250°C, bed 65°C, speed 30–150 mm/s; higher speeds may need higher nozzle temps.

Source: MatterHackers

Summarized from the linked source. Always test on scrap before production runs.