Nylon / NylonX / NylonG on Any

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any

Filament brand

MatterHackers

Filament type

Nylon / NylonX / NylonG

Slicer

Any

Nozzle temp

240–260 °C (start 250 °C)

Bed temp

55–65 °C garolite / 70–80 °C glass

Chamber / enclosure

Enclosure if drafty

Speed

30–60 mm/s

Layer height

0.2–0.4 mm

Cooling

0% layer cooling

Notes

MatterHackers nylon how-to: start 250°C ±5; bed 55–65°C on garolite+PVA or 70–80°C glass+PVA; NylonX bed ~60°C, NylonG ~65°C; no cooling fan; dry thoroughly.

Source: MatterHackers

Summarized from the linked source. Always test on scrap before production runs.