PLA on Anycubic Kobra 3 Max

blog

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Anycubic Kobra 3 Max

Filament brand

Prusament

Filament type

PLA

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

220 °C (mfr 200–230)

Bed temp

60 °C

Speed

infill cap ~241 mm/s; outer ~125 mm/s

Layer height

0.20 mm

Retraction

0.8 mm

Cooling

35% listed in profile sheet

Notes

SliceSpec validated Kobra 3 Max + Prusament PLA: 220/60°C, max volumetric 20.3 mm³/s, PA 0.032, line 0.42/0.40 mm. Manufacturer range 200–230 nozzle / 60 bed.

Source: SliceSpec

Summarized from the linked source. Always test on scrap before production runs.