PETG V0 on Anycubic Kobra 3 Max

blog

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Anycubic Kobra 3 Max

Filament brand

Prusament

Filament type

PETG V0

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

250 °C (mfr 230–260)

Bed temp

75 °C

Speed

infill cap ~196 mm/s; outer ~102 mm/s

Layer height

0.20 mm

Retraction

0.8 mm

Cooling

35%

Notes

SliceSpec Kobra 3 Max + Prusament PETG V0: 250/75°C, max flow 16.5 mm³/s, PA 0.032. Dry at 65°C noted.

Source: SliceSpec

Summarized from the linked source. Always test on scrap before production runs.