ASA on Anycubic Kobra 3 Max

blog

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Anycubic Kobra 3 Max

Filament brand

Prusament

Filament type

ASA

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

270 °C (mfr 250–280)

Bed temp

100 °C

Chamber / enclosure

Enclosure recommended

Speed

infill cap ~220 mm/s; outer ~114 mm/s

Layer height

0.20 mm

Retraction

0.8 mm

Cooling

35%

Notes

SliceSpec Kobra 3 Max + Prusament ASA: 270/100°C, max flow 18.5 mm³/s, PA 0.032. Mfr range 250–280 nozzle / 100 bed.

Source: SliceSpec

Summarized from the linked source. Always test on scrap before production runs.