PLA on Any (OrcaSlicer)

wiki

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer)

Filament brand

—

Filament type

PLA

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

180–220 °C

Bed temp

50–60 °C

Chamber / enclosure

Ambient

Notes

OrcaSlicer official wiki standard temperature table: PLA nozzle 180–220 °C, bed 50–60 °C, chamber Ambient. Ranges are starting points — calibrate per brand.

Source: OrcaSlicer Wiki

Summarized from the linked source. Always test on scrap before production runs.