Any (OrcaSlicer 2.5) / Fuzzy Skin — Combined mode

Fuzzy Skin — Combined mode on Any (OrcaSlicer 2.5)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer 2.5)

Filament brand

—

Filament type

Fuzzy Skin — Combined mode

Slicer

OrcaSlicer 2.5

Nozzle size

0.4 mm

Notes

Official wiki: Combined mode = Displacement + Extrusion. Sharp like Displacement, stronger walls, ~half the kinematic load of Displacement. Still needs Arachne for the extrusion half.

Source: OrcaSlicer Wiki · 2026-10-01

Summarized from the linked source. Always test on scrap before production runs.