ABS on Any (OrcaSlicer)

wiki

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer)

Filament brand

—

Filament type

ABS

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

230–250 °C

Bed temp

90–100 °C

Chamber / enclosure

50–70 °C

Notes

OrcaSlicer official wiki standard temperature table: ABS nozzle 230–250 °C, bed 90–100 °C, chamber 50–70 °C. Ranges are starting points — calibrate per brand. Enclosure/chamber helps reduce warping.

Source: OrcaSlicer Wiki

Summarized from the linked source. Always test on scrap before production runs.