Nylon 6 on Any (OrcaSlicer)

wiki

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer)

Filament brand

—

Filament type

Nylon 6

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

230–260 °C

Bed temp

90–110 °C

Chamber / enclosure

70–100 °C

Notes

OrcaSlicer official wiki standard temperature table: Nylon 6 nozzle 230–260 °C, bed 90–110 °C, chamber 70–100 °C. Ranges are starting points — calibrate per brand. Dry thoroughly; chamber important for warp-prone nylons.

Source: OrcaSlicer Wiki

Summarized from the linked source. Always test on scrap before production runs.