PC on Any (OrcaSlicer)

wiki

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer)

Filament brand

—

Filament type

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

270–310 °C

Bed temp

100–120 °C

Chamber / enclosure

80–100 °C

Notes

OrcaSlicer official wiki standard temperature table: PC nozzle 270–310 °C, bed 100–120 °C, chamber 80–100 °C. Ranges are starting points — calibrate per brand. All-metal hotend implied by the high range; chamber helps layer bonding.

Source: OrcaSlicer Wiki

Summarized from the linked source. Always test on scrap before production runs.