PC-ABS on Any (OrcaSlicer)

wiki

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer)

Filament brand

—

Filament type

PC-ABS

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

260–280 °C

Bed temp

95–110 °C

Chamber / enclosure

60–80 °C

Notes

OrcaSlicer official wiki standard temperature table: PC-ABS nozzle 260–280 °C, bed 95–110 °C, chamber 60–80 °C. Ranges are starting points — calibrate per brand. Official Orca standard range for PC-ABS blends.

Source: OrcaSlicer Wiki

Summarized from the linked source. Always test on scrap before production runs.