Acetal (POM) on Any (OrcaSlicer)

wiki

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (OrcaSlicer)

Filament brand

—

Filament type

Acetal (POM)

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

210–240 °C

Bed temp

100–130 °C

Chamber / enclosure

70–100 °C

Notes

OrcaSlicer official wiki standard temperature table: Acetal (POM) nozzle 210–240 °C, bed 100–130 °C, chamber 70–100 °C. Ranges are starting points — calibrate per brand. Official Orca standard range for acetal/POM.

Source: OrcaSlicer Wiki

Summarized from the linked source. Always test on scrap before production runs.