PLA Meta on Bambu Lab P1S / P1P

community

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab P1S / P1P

Filament brand

Sunlu

Filament type

PLA Meta

Slicer

Bambu Studio

Nozzle size

0.4 mm

Nozzle temp

195–200 °C

Bed temp

55–65 °C

Notes

Owners print Sunlu PLA Meta on the Bambu PLA Basic preset, changing only temps: 200 °C / 65 °C open printer; 195 °C / 55 °C once enclosed (warping when bed was hot). Another owner: 195 °C nozzle, 61 °C bed, door open, K-factor 0.18, generic PLA retraction. A wet spool fixed by drying 55 °C for 9 h.

Source: bluewolfxD and others, Bambu Lab Community Forum · 2023-08-12

Summarized from the linked source. Always test on scrap before production runs.