PETG on Bambu Lab X1C

community

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab X1C

Filament brand

Overture / Prusament / PolyLite / eSun

Filament type

PETG

Slicer

Bambu Studio

Nozzle size

0.4 mm

Nozzle temp

265 °C (first layer 255 °C)

Bed temp

75–80 °C textured plate

Speed

keep features under 200 mm/s; outer wall and top surface 100–150 mm/s

Cooling

part fan min 0 / max 20%; aux fan 90%; chamber fan max (M106 P3 S255 in filament start G-code)

Notes

Rough values the poster uses for every PETG tested (Overture, Prusament, PolyLite, eSun) to fix blobs, curling strings and poor overhangs. Print with the door and lid open in a cool room. Max volumetric over 20 mm³/s measured for Prusament and Overture.

Source: djeZo888, Bambu Lab Community Forum · 2023

Summarized from the linked source. Always test on scrap before production runs.