PETG on Bambu Lab X1C / P1P

community

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab X1C / P1P

Filament brand

Overture

Filament type

PETG

Slicer

Bambu Studio

Nozzle size

0.4 mm hardened steel

Nozzle temp

260–265 °C (one white spool 275 °C from temp tower)

Retraction

1 mm @ 35 mm/s

Notes

Overture PETG owners on hardened-steel nozzles run hotter than the spool max of 250 °C: 260–265 °C for years of use; a white spool tower-tested at 275 °C with 1 mm retraction at 35 mm/s printed flawlessly. Generic PETG profile otherwise.

Source: azCubs76, EICO, Bambu Lab Community Forum · 2023-11-25

Summarized from the linked source. Always test on scrap before production runs.