PETG / copolyester on Any

youtube

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any

Filament brand

—

Filament type

PETG / copolyester

Slicer

Any

Nozzle temp

230 °C if no maker recommendation

Retraction

add about 1 mm (direct drive) or 2–3 mm (Bowden) over PLA

Cooling

part fan 20–50%

Notes

Thomas Sanladerer: start from a working PLA profile, cut fan to 20–50%, set temp per the maker (230 °C default; raise for poor adhesion, lower for stringing). Travel as fast as possible. Never print PETG straight onto glass. Dry wet PETG at 60 °C for 1–2 h.

Source: Made with Layers (Thomas Sanladerer) · 2018-02-02

Summarized from the linked source. Always test on scrap before production runs.