PLA / PETG / TPU on Anycubic Kobra 3 Max (0.6 / 0.8 mm nozzle)
communityTest on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.
Printer
Anycubic Kobra 3 Max (0.6 / 0.8 mm nozzle)
Filament brand
—
Filament type
PLA / PETG / TPU
Slicer
OrcaSlicer
Nozzle size
0.6 mm and 0.8 mm
Nozzle temp
PLA 225 / 235 °C; PETG 240 / 250 °C; TPU 215 / 225 °C (0.6 / 0.8 mm), vs 210 / 225 / 205 °C at 0.4 mm
Layer height
0.6 mm: 0.30 fine, 0.36 standard, 0.42 draft, 0.48 super draft; 0.8 mm: 0.32, 0.48, 0.56, 0.64
Notes
Community K3M profile pack for big nozzles on the Kobra 3 Max; temps scaled up 15 °C for 0.6 mm and 25 °C for 0.8 mm (10/20 °C for TPU). Adjust ±5 °C per brand.
Source: orlandobianco (GitHub)