Matte PETG on Bambu Lab (X1C and other Bambu printers)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab (X1C and other Bambu printers)

Filament brand

Build It Full

Filament type

Matte PETG

Slicer

Bambu Studio (Generic PETG, modified)

Nozzle size

0.4 mm

Nozzle temp

240 °C

Bed temp

50–60 °C textured PEI

Notes

Build It Full Matte PETG on Bambu: flow ratio 0.82 (0.80–0.85 range; try 0.98 first). A hotter bed makes Matte PETG stick too firmly.

Source: Build It Full

Summarized from the linked source. Always test on scrap before production runs.