Bambu Lab P1S (eSUN test printer) / PETG-Basic

PETG-Basic on Bambu Lab P1S (eSUN test printer)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab P1S (eSUN test printer)

Filament brand

eSUN

Filament type

PETG-Basic

Slicer

OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

250 °C (250±5 °C)

Bed temp

70 °C (PEI, glue spray)

Speed

250 mm/s

Cooling

Fan 100%

Notes

eSUN PETG-Basic TDS. Dry at 60 °C. Test prints at 255 °C/70 °C, 2 walls, 3 top/bottom, 100% infill. Max volumetric flow 4 mm³/s (Bambu P1S 0.4 nozzle, OrcaSlicer 2.1.0 Beta). Tips: align Z seam, avoid crossing walls on travel.

Source: eSUN

Summarized from the linked source. Always test on scrap before production runs.