PVA / ePVA+ (support) on Any (dual nozzle)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (dual nozzle)

Filament brand

eSUN

Filament type

PVA / ePVA+ (support)

Slicer

Any

Nozzle temp

190–210 °C

Bed temp

60–80 °C (Kapton/PET tape)

Speed

40–60 mm/s, travel 80–150 mm/s

Notes

eSUN Filament User Guide. Support infill 50–100%, critical support angle ≤45°, support-to-model gap 0.

Source: eSUN

Summarized from the linked source. Always test on scrap before production runs.