Any (direct drive) / eFlex / eLastic / eTPU-95A / eTPU-98A

eFlex / eLastic / eTPU-95A / eTPU-98A on Any (direct drive)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any (direct drive)

Filament brand

eSUN

Filament type

eFlex / eLastic / eTPU-95A / eTPU-98A

Slicer

Any

Nozzle temp

210–240 °C

Bed temp

No heat (Kapton/PET tape)

Speed

20–40 mm/s, travel 80–150 mm/s

Cooling

Fan 100%

Notes

eSUN Filament User Guide: near-end (direct) extruder. Walls ≥3. General retraction advice in the same guide: direct drive 1–3 mm @ 20–30 mm/s, Bowden 4–6 mm @ 40–60 mm/s.

Source: eSUN

Summarized from the linked source. Always test on scrap before production runs.