Bronze / eCopper / eAL-fill / eSteel (metal-filled) on Any

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Any

Filament brand

eSUN

Filament type

Bronze / eCopper / eAL-fill / eSteel (metal-filled)

Slicer

Any

Nozzle size

≥0.6 mm

Nozzle temp

190–220 °C (Bronze 180–210 °C)

Bed temp

60–80 °C

Speed

40–60 mm/s, travel 80–150 mm/s

Cooling

Fan 50–100%

Notes

eSUN Filament User Guide. Walls ≥3, infill 50–100%. Use 0.6 mm+ nozzle to avoid clogs; clean with PLA after long prints.

Source: eSUN

Summarized from the linked source. Always test on scrap before production runs.