High Speed TPU on Bambu Lab P1S

community

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab P1S

Filament brand

Overture

Filament type

High Speed TPU

Slicer

Bambu Studio / OrcaSlicer

Nozzle size

0.4 mm

Nozzle temp

230 °C

Retraction

1 mm @ 20 mm/s, Z-hop 0.1 mm, wipe 3 mm

Notes

Bambu forum user tuning: flow ratio 0.99, max volumetric speed 8 mm³/s. Thread starter used generic TPU with retraction 1 mm and volumetric 7.2 mm³/s. Overture recommends drying TPU at 70 °C.

Source: Bambu Lab Community Forum · 2023-12-17

Summarized from the linked source. Always test on scrap before production runs.