Bambu Lab (X1C / P1) / PETG Basic / PETG HF

PETG Basic / PETG HF on Bambu Lab (X1C / P1)

community

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Bambu Lab (X1C / P1)

Filament brand

Bambu Lab

Filament type

PETG Basic / PETG HF

Slicer

Bambu Studio / OrcaSlicer

Speed

80 mm/s PETG Basic, 120 mm/s PETG HF; accel 25% of defaults

Retraction

Wipe while retracting on; retract speed up to 45 mm/s; Z-hop

Cooling

Generic PETG cooling

Notes

Advice from a Bambu forum thread on angel-hair stringing with Overture PETG: dry filament, calibrate flow manually, enable wipe while retracting, avoid crossing infill/top patterns. Speeds quoted are for Bambu PETG Basic and PETG HF.

Source: Bambu Lab Community Forum · 2025-03-10

Summarized from the linked source. Always test on scrap before production runs.