Snapmaker U1 / PLA SnapSpeed model + PETG HF support interface

PLA SnapSpeed model + PETG HF support interface on Snapmaker U1

youtube

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Snapmaker U1

Filament brand

Snapmaker

Filament type

PLA SnapSpeed model + PETG HF support interface

Slicer

Snapmaker Orca / OrcaSlicer

Nozzle temp

PETG 265 °C, PLA 230 °C

Bed temp

65 °C

Notes

Snapmaker official U1 video (Aurora Whisper transcript). PETG max volumetric speed 10 mm³/s. Same support settings as the PETG-model setup: top Z distance 0, 3 interface layers, Rectilinear interlaced interface, interface spacing 0.

Source: Snapmaker · 2026-07-01

Summarized from the linked source. Always test on scrap before production runs.