Prusa Core One / Core One+ / Core One L (Recreus 2.20 mm hotend) / Filaflex 82A (2.20 mm)

Filaflex 82A (2.20 mm) on Prusa Core One / Core One+ / Core One L (Recreus 2.20 mm hotend)

youtube

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Prusa Core One / Core One+ / Core One L (Recreus 2.20 mm hotend)

Filament brand

Recreus

Filament type

Filaflex 82A (2.20 mm)

Slicer

PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

240 °C first layer, 255 °C other layers

Bed temp

30 °C

Layer height

0.2 mm

Retraction

2.5 mm @ 50 mm/s, Z lift 0, min travel 2 mm, retract 90% before wipe

Cooling

Bridge fan 50%

Notes

Recreus video (Aurora Whisper transcript): start from Generic Flex for Core One, filament diameter 2.18 mm, extrusion multiplier 1, max volumetric speed 16 mm³/s. Top 5 / bottom 4 solid layers, avoid crossing perimeters (max detour 400), seam rear, infill 20%, infill/perimeter overlap 25%, bridge flow 0.7. Loosen extruder tension screws two turns.

Source: RECREUS 3D PRINTING

Summarized from the linked source. Always test on scrap before production runs.