Anycubic Kobra 3 Max (0.6 mm nozzle) / PLA / PETG / TPU

PLA / PETG / TPU on Anycubic Kobra 3 Max (0.6 mm nozzle)

community

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Anycubic Kobra 3 Max (0.6 mm nozzle)

Filament brand

Generic

Filament type

PLA / PETG / TPU

Slicer

Anycubic Slicer Next

Nozzle size

0.6 mm

Nozzle temp

PLA 225 °C; PETG 240 °C; TPU 215 °C

Speed

Max volumetric PLA 18 / PETG 12 / TPU 4.5 mm³/s

Layer height

0.30 fine / 0.36 standard / 0.42 draft / 0.48 super draft mm

Notes

Community K3M profile set (GitHub). Author scaled Anycubic's 0.4 mm values by nozzle area (0.4 mm baseline PLA 210 / PETG 225 / TPU 205 °C; 13 / 8 / 3.2 mm³/s). Line width 0.62–0.65 mm. Calculated values: calibrate flow in 0.02 steps.

Source: orlandobianco

Summarized from the linked source. Always test on scrap before production runs.