Anycubic Kobra 3 Max (0.8 mm nozzle) / PLA / PETG / TPU

PLA / PETG / TPU on Anycubic Kobra 3 Max (0.8 mm nozzle)

community

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Anycubic Kobra 3 Max (0.8 mm nozzle)

Filament brand

Generic

Filament type

PLA / PETG / TPU

Slicer

Anycubic Slicer Next

Nozzle size

0.8 mm

Nozzle temp

PLA 235 °C; PETG 250 °C; TPU 225 °C

Speed

Max volumetric PLA 21 / PETG 16 / TPU 6.4 mm³/s

Layer height

0.32 fine / 0.48 standard / 0.56 draft / 0.64 super draft mm

Notes

Community K3M profile set (GitHub), temps checked against Anycubic's official 0.4 to 0.8 mm data. Line width 0.82–0.85 mm. Calculated values: calibrate flow in 0.02 steps.

Source: orlandobianco

Summarized from the linked source. Always test on scrap before production runs.