PC Blend on Prusa (Core One / MK4S / XL)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Prusa (Core One / MK4S / XL)

Filament brand

Prusament

Filament type

PC Blend

Slicer

PrusaSlicer

Nozzle size

0.4 mm

Nozzle temp

275 ± 10 °C

Bed temp

110 ± 10 °C

Speed

Up to 200 mm/s

Cooling

Fan 20% (0–30%); 20%+ for overhangs/bridges, off can work better for large prints without bridges

Notes

Prusament PC Blend technical datasheet (v1.1). Bed: satin, smooth PEI (with glue stick) or powder-coated sheet (with glue stick). Use a 4 mm brim for parts bigger than 5 cm. Test specimens printed at 275 °C / 115 °C, extrusion multiplier 1.034, cooling off.

Source: Prusa Polymers · 2022-02-16

Summarized from the linked source. Always test on scrap before production runs.