Prusa CORE One+ / CORE One L / Pro HT90 / PA11 (Nylon)

PA11 (Nylon) on Prusa CORE One+ / CORE One L / Pro HT90

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Prusa CORE One+ / CORE One L / Pro HT90

Filament brand

Prusament

Filament type

PA11 (Nylon)

Slicer

PrusaSlicer

Nozzle size

0.4 mm standard brass

Nozzle temp

275 ± 10 °C

Bed temp

100 ± 10 °C

Chamber / enclosure

Enclosure required, 55 ± 5 °C

Notes

Official Prusament PA11 page. Use the PA Nylon steel sheet (don't apply IPA to it); strong warping, hygroscopic, odor (active filtration recommended). Heat resistance up to 122.5 °C after annealing.

Source: Prusament

Summarized from the linked source. Always test on scrap before production runs.