PETG Ultraglow (glow-in-the-dark) on Prusa Core One+/L / MK4S / XL / Pro HT90

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Prusa Core One+/L / MK4S / XL / Pro HT90

Filament brand

Prusament

Filament type

PETG Ultraglow (glow-in-the-dark)

Slicer

PrusaSlicer

Nozzle size

0.6 mm hardened nozzle recommended (hardened required)

Nozzle temp

260 ± 10 °C

Bed temp

85 ± 10 °C

Chamber / enclosure

Not necessary

Notes

Official Prusament PETG Ultraglow page. Satin or TXT sheet. Highly filled with strontium aluminate, so it's abrasive.

Source: Prusament

Summarized from the linked source. Always test on scrap before production runs.