Prusa (Core One / MK4S / XL) / PETG Magnetite 40%

PETG Magnetite 40% on Prusa (Core One / MK4S / XL)

official
Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.
Printer
Prusa (Core One / MK4S / XL)
Filament brand
Prusament
Filament type
PETG Magnetite 40%
Slicer
PrusaSlicer
Nozzle size
0.4 mm hardened nozzle required
Nozzle temp
270 ± 5 °C
Bed temp
100 ± 10 °C
Chamber / enclosure
Not required
Notes
Official Prusament PETG Magnetite 40% page. Textured or satin sheet. Dry or wet sanding both work.
Source: Prusament
Summarized from the linked source. Always test on scrap before production runs.