Prusa Pro HT90 (heated chamber min 90 °C) / PEI 1010

PEI 1010 on Prusa Pro HT90 (heated chamber min 90 °C)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Prusa Pro HT90 (heated chamber min 90 °C)

Filament brand

Prusament

Filament type

PEI 1010

Slicer

PrusaSlicer

Nozzle size

High-temperature hot end required

Nozzle temp

410 ± 10 °C

Bed temp

150 ± 10 °C

Chamber / enclosure

Enclosure necessary (heated chamber, min 90 °C)

Notes

Official Prusament PEI 1010 page. HT90 textured powder-coated sheet (spread thin MagiGoo HT first) or HT90 PA Nylon powder-coated sheet. Extremely hygroscopic: dry 6–8 h at 150 °C before every print and keep in a dry box while printing.

Source: Prusament

Summarized from the linked source. Always test on scrap before production runs.