Snapmaker U1 (smooth PEI plate) / Bed temps by material (PLA, PETG, ABS, ASA, TPU, PEBA, PVA, PC, PA, PET-CF)

Bed temps by material (PLA, PETG, ABS, ASA, TPU, PEBA, PVA, PC, PA, PET-CF) on Snapmaker U1 (smooth PEI plate)

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Snapmaker U1 (smooth PEI plate)

Filament brand

Generic

Filament type

Bed temps by material (PLA, PETG, ABS, ASA, TPU, PEBA, PVA, PC, PA, PET-CF)

Slicer

Snapmaker Orca

Bed temp

PLA/PLA-CF/PLA-GF 25–70 °C; PETG/PETG-CF 60–85 °C; ABS/ASA 90–100 °C; TPU 25–60 °C; PEBA 90–100 °C; PVA 45–65 °C; PC/PC-CF 90–100 °C; PA/PA-CF/PAHT-CF 90–100 °C; PET-CF 80–100 °C

Notes

Official Snapmaker smooth PEI steel plate table. Glue stick or liquid glue for PETG, ABS, ASA, PVA, PC, PA and PET-CF (adhesion plus release agent to protect the PEI); not needed for PLA, TPU or PEBA.

Source: Snapmaker

Summarized from the linked source. Always test on scrap before production runs.