Matte PLA on Anycubic Kobra 3 Max

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Anycubic Kobra 3 Max

Filament brand

Anycubic

Filament type

Matte PLA

Slicer

Anycubic Slicer Next / Orca

Nozzle size

0.4 mm

Nozzle temp

190-230 °C

Bed temp

45-60 °C

Speed

30-200 mm/s

Notes

Higher temp improves detail. Soft matte finish hides layer lines. Dry recommended.

Source: Anycubic Wiki · 2025-07-25

Summarized from the linked source. Always test on scrap before production runs.