Glow PLA on Anycubic Kobra 3 Max

official

Test on scrap first. Settings are starting points from the linked source. Dry hygroscopic filaments before printing.

Printer

Anycubic Kobra 3 Max

Filament brand

Anycubic

Filament type

Glow PLA

Slicer

Anycubic Slicer Next / Orca

Nozzle size

0.4 mm

Nozzle temp

205-235 °C

Bed temp

50-60 °C

Speed

50-200 mm/s

Notes

Glow up to ~120 min after charge. Brittle; ACE Pro may clog — use external spool.

Source: Anycubic Wiki · 2025-07-25

Summarized from the linked source. Always test on scrap before production runs.